When you want to really enjoy your music and rich, live performance sound, the JBL GTO608C will turn your car into a performance venue. The GTO608C is home to an impressive list of JBL® audio breakthroughs, proprietary technology and patents: Plus One® woofer cones, My-Ti™ tweeters. I-Mount™ for easy installation, and a computer-optimized outboard component crossover network. Sound so good you might be tempted to charge admission.
At a Glance:
Patented Plus One® woofer cones
Computer-optimized ourboard component crossover network
Increased power handling with My-Ti™ tweeters
Accurate frequency response
JBL I-Mount™ for easy installation
What's in the box:
(2) GTO608C Midwoofers
(2) Tweeter brackets
(2) Caps screws for tweeter brackets
(2) Additional alternate tweeter encasements
(2) Additional alternate tweeter brackets
(2) Additional alternante bracket cap
(1) Owner's Manual
(2) Grilles, (2) mounting bracket for woofers, (2) buffer pieces for grille/mounting bracket
(2) Crossover units
(12) Screw clips
(8) Small clip screws, (2) long clip screws
(4) Sets of speaker wire
(2) Tweeter encasements
- Patented Plus One® woofer cones
- The JBL-only Plus One® woofer cone (patent no. 7,548,631 B2) is exceptionally stiff, lightweight and has up to 25 percent more active surface area than you’ll ever find on competing models of the same size. You get an audible increase in bass output and efficiency.
- Computer-optimized ourboard component crossover network
- The GTO608C has a voice-matched outboard component crossover network to ensure optimum transition from the midwoofer to the midrange speaker and the tweeter. You get realistic, hear-every-detail sound.
- Increased power handling with My-Ti™ tweeters
- My-Ti™ tweeters deliver increased power handling, reduced distortion and increased efficiency. A Mylar®/titanium composite dome makes way for open, smooth spacious sound and a seamless transition between the middle and high frequencies.
- Accurate frequency response
- With a frequency response of 50Hz to 21kHz, the GTO608C reproduces powerful, teeth-rattling bass tones and the highest highs without distortion.
- JBL I-Mount™ for easy installation
- I-Mount™ (patent no. 5,859,917) allows for more precise imaging and simplifies tweeter installation with angle-, surface- or flush-mount options. It’s a tweeter mounting system that makes for one of the easiest and most versatile installations you’ve ever done.
- Tweeter Control
- The JBL GTO608C has a tweeter high-cut filter on the crossover that allows you to attenuate the tweeter by -6dB to optimize performance and optimize blend with the the mid/woofer based on installation location.Personal, tweeter level control.
Manuals & Downloads:
- Owner's Manual (DE)
- Owner's Manual (EN)
- Grand Touring
- Frequency Response
- Power Handling (RMS)
- Power Handling (Peak)
- (2.83V@1m) 92dB
- Nominal Impedance
- 2 ohms
- Low-Frequency Transducer
- PlusOne® HCL™ honeycomb-laiminate cone
- HF cut: 0dB/-6dB
- Crossover Frequencies
- High-Frequency Transducer
- 25mm (1") edge-driven My-Ti™ dome, pivoting
- Mounting Depth Woofer (in)
- External Diameter Woofer (mm)
- External Diameter Woofer (in)
- Mounting Cutout Diameter Woofer (mm)
- External Diameter Tweeter (in)
- Mounting Depth Woofer (mm)
- Mounting Cutout Diameter Woofer (in)
- Mounting Cutout Diameter Tweeter (mm)
- Mounting Cutout Diameter Tweeter (in)
- External Diameter Tweeter (mm)
- Mounting Depth Tweeter (in)
- Mounting Depth Tweeter (mm)
GTO608C wurde bewertet mit von 5 von 2.
Rated 4 von 5 von MrBee aus Clean + low distortion I've had these in my car for 6 months now. They sound super clean and crisp. there's no need for the tweeter boost on the cross over. The only thing I don't like is the lack of lower mid range. I think that's due to my doors design though,, not the speaker.
Rated 2 von 5 von harley aus Mediocre These components are about average and definitely leave a lot to be desired. Fs = 83Hz, no inductor in the crossover, almost too crisp highs. No low end bass, the factory speakers deliver better here. They do have punchy midbass which is an interesting combination with the stock front speakers. The ease of install is excellent as everything you need is included, but overall sound quality is just so-so. For the price $$ they are alright, but no way I would pay $$$ for them.
JBL GTO608C. the JBL GTO608C works at 4 ohms or only 2 ohms in its box says 4 Ohms is marked well, but in its manual of its specifications only says 2 ohms does not mention 4 ohms help please.
The JBL GTO608C has a nominal impedance of 2 ohms and it does not have a switch where you can choose between 2 ohms and 4 ohms so it would not work at 4 ohms.
do you have to install this in pairs or only which is blown out?
Please do not listen to Randy! Unless you are replacing the exact same speaker, you need to replace both, especially if you are replacing factory speakers. It will sound horrible with two different speakers for many reasons.
are these the best to remedy my 2007 Toyota Sequoia's front door speakers that are producing a rattling sound? Would I need the whole system, or just two 6-1/2 inch speakers?
Thank you for your question on the door speaker, looking at your car speaker guide you can opt out the tweeter and the crossover and just install the 6 1/2 speakers, for cost saving you can look at our GX 6 1/2 series and just get the speaker not the entire set
Hello, What is the woofer surround made from on the GTO608C and the other GTO series speakers? Foam? Rubber? Cloth? Thanks, Ryan
Suchergebnis für ""