Harman/Kardon

MAS Speakers

Details
Artikel-Nr. MASSPEAKERS
Variations
  • Select Color
Product Actions
Add to cart options

Additional Information
As part of a compact music system, the MAS Speakers are proud overachievers, offering a pair of custom 5-inch (130-millimeter) bass-reflex speakers with 1-inch (25-millimeter) dome tweeters.
At a Glance:
  • Matching loudspeaker technology
  • Gold-plated, binding-post speaker connectors
What's in the box:
  • 2 Two-way bass-re?ex loudspeakers
  • 1 3-foot (1-meter) stereo RCA male-to-male cable
As part of a compact music system, the MAS Speakers are proud overachievers, offering a pair of custom 5-inch (130-millimeter) bass-reflex speakers with 1-inch (25-millimeter) dome tweeters.
Product Features:
  • Matching loudspeaker technology.
    The MAS Speakers utilizes a two-way configuration featuring flat-panel, 5-inch (130-millimeter) bass drivers and proprietary 1-inch (25-millimeter) MMD® dome tweeters with integral waveguides. The system also eliminates unwanted sonic refractions for cleaner, more natural sound and improves off-axis performance for more accurate stereo imaging and high-frequency performance.
  • Gold-plated, binding-post speaker connectors
    When it comes to speaker connectors, quality of sound is of paramount important. That’s why the MAS Speakers keeps its connections to the outside world secure and reliable, using gold-plated binding posts. You can also interconnect the system with a variety of speaker-wire formats, thereby offering an increased degree of product compatibility.
Allgemeine Spezifikationen:
Low-Frequency Transducers
Two 130mm honeycomb composite drivers, ported
High-Frequency Transducers
Two 25mm MMD® domes, shielded
Nominal Impedance
8 ohms
Audio Specifications:
Sensitivity (2.83V/1m)
85dB
Frequency Response
60Hz–25kHz (–3dB)
Crossover Frequency
2200Hz
Dimensions:
Height
10-23/32" (272mm)
Width
7-1/8" (181mm)
Depth
7-3/4" (196mm)
Weight
9.8 lb (4.4kg) each
MAS Speakers wurde bewertet mit 4.5 von 5 von 4.
Rated 5 von 5 von aus Perfect book The sound is amazing! Crystal clear highs well defined mids and they go down to 65hz I feed them 60 watts per channel with rotel amp and they fill the entire living room with sound.
Veröffentlichungsdatum: 2016-04-06
Rated 5 von 5 von aus great sound I've had the whole mas102 system for a few years now and it performs very well. stunning sound to say the least.
Veröffentlichungsdatum: 2015-08-21
Rated 5 von 5 von aus Great Build Quality! There is one thing that I can say about H/K and that is they always build their products with looks in mind. The lacquer black finish on these speakers is awesome!
Veröffentlichungsdatum: 2016-01-30
Rated 3 von 5 von aus harman kardon amplifer you can not use other devices[record player or cassette player] with it
Veröffentlichungsdatum: 2015-12-21
  • y_2018, m_7, d_15, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_de_AT, sid_masspeakers, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_harmanaudio

can i add this set of speaker to my current hkts 16 to replace the front two speaker? will it sound weird in a 5.1 movie ?

Gefragt von: gordonblue
It will not sound weird but when designing a 5.1 system, it is recommended to stay with one series to get the best result, as all speakers are voice-matched, so they will all work well together. The MAS Speakers can handle up to 65 watts per channel. So as long as your receiver has a power output of 65 watts per channel or less, these speakers will work fine as a replacement to the HKTS 16’s front two speakers.
Beantwortet von: Joe G at Customer Service
Veröffentlichungsdatum: 2017-10-17

Hi, We have an older version of the amplifier harman/kardon hlc 495i and want to replace the lound speaker. Loudspeackers that they can still wired to our old amplifier. Are your model MAS Speakers compatible with the old ampliflier, eg.g. watts?

Gefragt von: Hans Schuster
The MAS Speakers can handle up to 65 watts per channel. So as long as your amplifier has a power output of 65 watts per channel or less, these speakers will work fine.
Beantwortet von: Joe G at Customer Service
Veröffentlichungsdatum: 2017-10-17

what is the speakers amps watts on mas speakers

Gefragt von: sandra
The MAS SPEAKERS can handle up to 130W RMS any more than that would cause clipping in audio or distorted audio.
Beantwortet von: Amir at Customer Service
Veröffentlichungsdatum: 2017-10-17

i have a bose surround sound pair of speakers with A 5.1 surround receiver . can i add these mas speakers with the included cord to my receiver to give it more sound ? will it work?

Gefragt von: khalil
If your receiver can accommodate up to 7 speakers for a 7.1 setup, then you can add the MAS SPEAKERS to your existing 5.1 speaker setup. If your receiver can only do 5.1, your best bet is to contact the manufacturer of your receiver. They can tell you if there is any way to add these additional speakers to it without doing any harm.
Beantwortet von: Joe G at Customer Service
Veröffentlichungsdatum: 2017-10-17

Can these be combined with the setup of a 5.1 speaker system, the Sat-TS11/the HKTS11 to get a 7.1 speaker system?

Gefragt von: deltatee
Yes, you can. If your AVR can accommodate up to 7 speakers for a 7.1 setup, then you can add the speakers to your existing 5.1 speaker setup.
Beantwortet von: Amir at Customer Service
Veröffentlichungsdatum: 2017-10-17

What is the Power handling limits for these MAS 5" bass-reflex speakers

Gefragt von: jbird36
The MAS SPEAKERS have an RMS of 65W each.
Beantwortet von: Amir at Customer Service
Veröffentlichungsdatum: 2017-10-17

for the purpose of listening music, do you recomend it over the HK-SAT-TS11 speakers ?

Gefragt von: papijoe
The SAT-TS11 speakers can handle up to 120W RMS per speaker compared to the MAS Speakers which can handle up to 130W RMS. With that said, it would really depend on what speaker system you would like to setup. If you are looking to setup a 5.1 speaker system, the Sat-TS11/the HKTS11 would be a better choice. If you are looking to setup a stereo system which only uses 2.1 setup, then you are better of with the MAS speakers. Just a reminder, your amplifier should not exceed the power that the speakers can handle(i.e 120W per channel amp for the SAT-TS11/HKTS11, 130W per channel for the MAS speakers).
Beantwortet von: Amir at Customer Service
Veröffentlichungsdatum: 2017-10-17

how many watts can i put thru one speaker without damaging

Gefragt von: papijoe
The MAS SPEAKERS can handle up to 130W RMS any more than that would cause clipping in audio or distorted audio and seriously damage the speakers.
Beantwortet von: Amir at Customer Service
Veröffentlichungsdatum: 2017-10-17
  • y_2018, m_7, d_15, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_de_AT, sid_masspeakers, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harmanaudio

Suchergebnis für ""